The connection window of MPManager is the starting point of your MP300 & MP500 user experience. All detected MP300 or MP500 devices are presented, and by double clicking on the one you wish to use, the connection is automatically established. The window also presents information such as the different options that are present inside your hardware, and the calibration date.
The configuration window of MPManager allows you to define the test conditions that will be applied during the test session. Depending on the connected MP300 or MP500,this window will show different settings, such as the field strength, the voltage, the carrier frequency. This window is also used to configure the spy feature, and the analog measurements.
The script window shows a catalogue of the different test features of your
MP300 or MP500 tester. By combining different actions together, you have the possibility
to define your own custom scripts. After editing the scripts, the user can execute
them, and collect the results in the “log” sub-window.
Your MP300 or MP500 tester embeds off-the-shelf test functionalities, that can be directly accessed from MPManager. Among the test possible, are the shmoo plot, the resonance frequency/Q factor measurement, open/short, leakage, Iforce/Vforce.
All of the MP300 or MP500 testers embed a spy. Depending on the hardware, it might be an external spy, or an internal spy.
In any case, MPManager supplies a mean to show the spied data in a user friendly manner, supported by numerous
protocol and business oriented decoders. Two level of display are possible: a high level one, with an extensive
interpretation of the data, and a low level one, close from the physical layer.
MPManager Test Platform
MP Manager embeds a test platform, allowing you to run our automated test libraries.