MP300 CL2
High performance industrial contactless reader/writer and tester
Industrial contactless smart card reader and tester
Supports ISO/IEC 14443 A/B, InnovatronTM, MifareTM, FeliCaTM, ISO/IEC 15693 protocols
Supports the highest data rates
Can manage wafers, micro-modules, smartcards, e-Passports, RFID tags
This production tester will typically be used in the following contexts :
- OS loading, pre-personalisation, or personalisation of micro-modules and smartcards
- Reel to reel test handlers (micro-modules, RFID tags, ...)
The main features of the MP300 CL2 are :
- Up to 2 MP300 CL2 testers can be installed on one MP300 mother board
- Compatible with ISO/IEC 14443-3 and -4, ISO/IEC 15693, MifareTM, FeliCaTM, InnovatronTM specifications
- Full management of the T=CL protocol
- Supports the highest data rates (up to 848 kbps)
- All physical parameters adjustable (field strength, carrier frequency, modulation index, rise and fall time of the modulation, ...)
- All logical parameters adjustable (data rate, duration of the bits, waiting time)
- Open for implementation of custom protocols
- Compatible with wafers, micro-modules, smartcards, e-Passports, M2M components, RFID tags, inlays
- Presence of an ISO/IEC 7816-3 SIM card reader, for SAM (security access module) usage
- Advanced logical test features (response time measurement, modulation alternance, short time between two commands, ...)
- Open platform : integrate the MP300 CL2 inside your own personalisation environment
- Compatible with the MVPi production machine interface
Number of independent test head per board : 1
Supported protocols
ISO/IEC 14443 (proximity cards) |
|
Type A |
|
Type B |
|
Anticollision |
|
T=CL protocol |
|
Supported data rates |
|
B' (Innovatron) |
|
Supported |
|
ISO/IEC 15693 (vicinity cards) |
|
Supported speeds |
|
Encoding modes |
|
ISO 18000-3 Mode 1 |
|
Supported |
|
Mifare TM |
|
Types supported |
|
Encryption |
|
FeliCa TM |
|
Available data rates |
|
Encryption |
|
Raw mode |
|
Gives the possibility to exchange frames without any protocolary encapsulation |
|
Out of standard chips |
|
Benefit from Micropross'experience in smartcard programming |
|
Programmable parameters
Physical parameters |
|
Field strength |
|
Modulation index |
|
Field rise time |
|
Carrier frequency |
|
Modulation rise and fall times |
|
Logical parameters |
|
Type A pause width |
|
Frame waiting time |
|
Type B framing (SOF, EGT, EOF, bit duration) |
|
Communication speed |
|
SAM (Security access module) plug available
An ISO 7816-3 compliant SIM chip reader is available on each CL2 module, in case security features are needed |
Available tests
Automatic testing |
|
Send type A command, wait, send type B command and receive answer (for type B cards) |
|
Send type B command, wait, sent type A command and receive answer (for type A cards) |
|
Switch on field, wait, send request command (A or B), receive answer |
|
Send request, wait, send request, receive the answer |
|
Antitearing |
|
PICC reset characterization |
|
Check minimum FDT (frame delay time) |
|
Testing through API manipulation |
|
Response time measurement |
|
Sending of out of standard frames |
|
Sending misformed blocks (wrong number of bits) |
|
Retro modulation ratio measurement |
|
Distance simulation checking |
Communication parameters
USB 2.0 |
|
TCP/IP 10/100 Mbps |
|
RS 232 |
Software development
Remote development (the code is executed from the PC) |
|
Elements available |
|
Supported programming languages |
|
Embedded development (the code is executed directly by the MP300) |
|
Recommended cross compiler |
|
User Interface
MPManager, MVPi |
The MP300 CL2 can be accessed using several ways :
- First, using the driver dll that we supply, which enables the user to access all functionnalities of the MP300 CL2 from any programming language that supports Dll
- For users prefering to embed their code directly inside the MP300 CL2, Micropross has designed the SORB interface, which completely encapsulates all programming tasks related to the management of embedded applications, and lets the user focus on the smartcard oriented code
- Finally, we can also supply our own user interface, MVPi, which elegantly conciliates convenience of use, high throughput and stability.
MVPi is able to handle up to 32 test heads at the same time, but upgrades are easily possible.
Statistics are available, either separated between all test heads, or displayed for the whole system
More statistics are available, showing the current test time, as well as the average one.
As smartcards are being produced, logfiles are also generated, that allow to keep track of the produced components. The content of this logfile is controlled by the user.
- Various sizes of rack housing, who allow to protect the Micropross testers from any kind of hazard
- Different types of antennas
- Software for production machines (MVPi)
We also supply packages to extend the warranty of the tester. Please ask us for the maintenance contracts available.






Type A


