NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

CONTACTLESS TEST STATION

NFC EMVCO conformance test system

Request for a quote
  • For conformance testing, you have all the needed elements : signal generator, oscilloscope, A/D converter board, RF amplifier, power supplies
  • Full set of libraries available for ISO 10373-6, ISO 10373-7, ICAO, NFC Forum, EMVCo testing

  • Supports analog, digital, and application tests
  • Full coverage of the respective test specifications
  • Fully automated operation, including self calibration of the system
  • Automated generation of test reports

Supported protocols

ISO/IEC 14443 (proximity)
Supported data rates :
- 106, 212, 424, 848 kbps
- VHBR optionnal. Support up to 6.8Mbps
- Asymetrical baudrates supported

B' (Innovatron)


ISO/IEC 15693 (Vicinity cards)

Supported data rates :
- Low & high data rate (1 out of 4, 1 out of 256)
Tag behaviour :
- 1 and 2 sub carriers

ISO 18000-3 Mode 1

Mifare
- Supported versions (Classic, Light, Ultra Light, Ultra Light C, Desfire)

FeliCa
- Supported data rates (212, 424 kbps)

NFC Forum modes
- Peer 2 Peer, Listening, Polling

NFC Forum tags
- Tag type 1 (Innovision Topaz)
- Tag type 2 (Mifare Ultra Light)
- Tag type 3 (FeliCa)
- Tag type 4 (ISO 14443 A/B)

ISO 18092 (NFC-IP1)
- Supported communication mechanisms (Active/passive mode, initiator/target)

Raw mode
- Possibility to implement custom protocols

Programmable parameters

Physical parameters (all types)
- Field strength
- Rise/fall time of the modulation
- Modulation index
- Pause time (ISO 14443 A & ISO 15693)
- Duration of each bit + EOF + SOF (ISO 14443 A)
- Arbitrary waveshape generator

Logical parameters
- Type A pause
- FWT, TR0, TR1, TR2
- Communication speed
- Response time (contactless smart card simulation)

 

Spy feature

Signals displayed :
- Field presence
- Modulation
- Sequences
- Bytes
- I/O direction
- Baudrate change
- Trigger state

Power amplifier Part

- Power output : 50W
- Input impedance : 50 Ohm
- Class A
- Baudrate coverage : From 106kbps to 6,8Mbps for optimum behaviour
- RF bandwidth : 6-20MHz

Oscilloscope part

- Bandwidth : 350MHz
- Number of channels : 4
- Sampling rate : 5GS.s
- Resolution : 8 bits

A/D converter block

- Model recommended for EMVCo analog testing
- Resolution : 14 bits
- Sampling rate : 130 MS.s
- Number of channels : 2

PC block

- Operating system : Windows 10 Pro SP1
- RAM : 8 GB
- Hard Drive : 750 GB
- Extension ports :
    - 8 USB 2.0
    - Ethernet connection
    - VGA screen

Mechanical dimensions : 230 mm x 431 mm x 466 mm

- Weight : 19 kg
- Cooling system : Integrated, no need for external cooling


The Contactless Test Station will typically be used in the following context : 

  • pre-qualification of a device : contactless smart card, reader, NFC device...
  • official type approval, when used with our EMVCo or NFC Forum validated test suite
  • test tool for smart watches