X
Your request has been saved.

It concerns the following products :


Do you want to send it now or do you have other request?

NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

NFC, E-PAYMENT & WIRELESS POWER TESTING

Micropross design R&D and Manufacturing test tools which characterize and test the electrical and protocol performance of products such as smart cards, smartphones and smart object in design, conformance and production

CONTACT-US

MP 65

Contact Smart cards reader

Request for a quote

END OF LIFE PRODUCT

The MP300 C3 is replacing the MP65.

 

The MP65 combines both price efficiency and technical flexibility, to offer the ideal smart card tester for protocol and application layers.

The MP65 main features are :

  • Simulation of contact smart card reader, or NFC CLF
  • Support of the ISO 7816, SWP/HCI, USB-IC, and USB 2.0 protocols
  • USB protocols are available as options
  • Customisation of physical parameters : Vcc, Clock frequency
  • Total possibility to program personalised protocols
  • Libraries for SWP/HCI and GlobalPlatform conformance testing available

Supported protocols

ISO/IEC 7816-3
-T=0 and T=1 protocols : 100% implemented, managed by Firmware and FPGA, accelerated by hardware

SWP/HCI (ETSI TS 102.613 and ETSI TS 102.622)
-SWP transmission : Assisted by hardware
-LLC layers support : ACT, CLT, S-HDLC realised by firmware

USB-IC (optionnal)
USB 2.0 (optionnal)

-Available speeds : Low speed, full speed
-Classes : ISO/IEC 7816-12, mass storage, custom protocols

Raw mode
-Implementation of custom protocols and support of out of standard chips

 

Programmable parameters

Physical parameters
Voltages
-Vcc : Adjustable from 1V to 6V
Clock frequency
-ISO 7816 clock :
    - Adjustable from 10kHz to 10Mhz
    - Duty cycle : 50%


Pin states
- All pins can be managed separately

ISO 7816 communication parameters
- Adjustable parameters : All normative timings (WWT, BWT, CWT, …), parity, pull-up resistor

SWP communication parameters
- Available baudrates : 106, 212, 424, 848 kbps, 1.6 Mbps
- Adjustable parameters : Activation time, P2, P3 parameters

USB-IC parameters
- Voltage classes supported : 1.8V and 3.0V


The MP65 will typically be used in the following contexts :

  • Debug of a smart card OS
  • Test of the HCI interface of a NFC enabled U-SIM
  • Sample testing in a production environment